For Authors

Dear authors!

Read the rules of articles' design in the Collection " Cutting & Tool In Technological Systems ", necessary documents, files for submission to the editorial office.

Information for Authors

The Cjllection of Science Papers " Cutting & Tool In Technological Systems " is designated for publishing the results of the most significant scientific and practical researches obtained by scientists of universities and scientific organizations in next topics: Technology of mechanical engineering; Technology reengineering in machine building; Addition technologies in mechanical engineering; Mechanization and automation of production processes; Mechanical processing of materials, the theory of cutting materials, mathematical and computer simulation of machining processes; Theory of designing machine tools and tools for material processing; The ability to use tools from new materials; Systems of automated designing of machine tools and tools; Mechatronic and robotic systems and complexes; Physical methods of research of processes of physical and technical processing; Mathematical modeling of processes of physical and technical processing of materials; Systems of automated design of technological processes of physical and technical processing; Standardization, certification and metrological assurance of the quality of mechanical engineering products;

Support of printing costs - editor does not require fee or charges for the paper. But our journal is not supported by government or any other organization. Only incomes from subscription or sale enable to publish our journal. Unfortunately sale incomes can not cover cost of publishing completely. To publish all papers we have to demand from the authors the declaration that they cover cost of printing. We established that these cost are as follows: 5 Euro for page black/white A5 format. In return for payment all papers are available in Open Access Mode.

Requirements for article submission

The article submission for publication to the journal editorial office executed via mail or personally and must contain the following documents:

1) a cover letter from the organization where the article was written or author's letter of intent;

2) information about authors in English containing the title of the article, as well as for each author's last name, first name (full), academic degree, academic title, and academic honors, awards, position, affiliation, ORCID, postal address of the place of work, e-mail, mobile phones, as well as specify with whom to correspond.

3) the set of files via e-mail:

- electronic version of the article in Microsoft Word 2003 doc format (download Article Example);
- information about authors in the format of Microsoft Word 2003 doc.

Submitting a manuscript to the journal authors confirm its compliance with all established requirements and certify that they own the exclusive copyright to the article, that it has not been previously published and submitted for consideration to the other journals.

Requirements for article formatting and structure

The Editorial Board takes into consideration articles in English, Russian and Ukrainian languages.

The volume of the article should be not less than 4 and not more than 15 pages.

Page parameters of Microsoft Word 2003 file:

- paper size – A5;
- orientation – portrait;
- font: headset – Times New Roman, size – 10 pt, scale – 100%, character spacing – normal;
- line spacing – 1;
- page margins – down, up – 1.8 cm; left and right – 1.5 cm;
- paragraph indent – 0.75 cm.

The article structure must contain the following items: UDC (Universal Decimal Classification) number; the paper title; a list of authors with positions, academic ranks and affiliations; an abstract (250-300 words), (800-1000 characters); key words (6-9 words or collocations); Introduction (no more than one page); Problem statement (of about half a page); Review of the literature (no more than two pages); Materials and methods; Experiments; Results; Discussion; Conclusions (no more than one page); Acknowledgements; Appendices (if necessary); References (bibliographic description of the sources used in the article in the original languages, style - IEEE).
Articles that do not meet these requirements will not be considered.

All articles undergo a blind peer review by the editorial staff and independent reviewers – the leading scientists on the profile of the journal. In case of article inconsistency with the journal requirements or in case of presence of editors and reviewers comments the Editorial Board inform author about rejection of article or send the article materials to the author for revision. Author sends a modified version of the article and response to reviewers' comments to the editorial office after article revision.
The editorial board reserves the right to literary edit an article text without notifying the author. Manuscripts and CDs are not returned. The editorial office does not send the article proofs and reprints to the authors.

Recommendations for article writing

The article structure must contain the following items:

 

1) UDC (Universal Decimal Classification) number in accordance with the tables issued by UDC Consortium (http://www.udcc.org).

2) The paper title should be concise, clear, informative, expressive, reflect the content of the article and to attract the reader's attention. The maximum title length is 10-12 words. Only the standard abbreviations can be used and the formula cannot be used in the title.

3) The list of authors contains the surname and initials of each author in the nominative case, his (her) academic degree and academic rank, position and place of work, the city and country of residence. The names of contributors for the collective article are listed in the sequence on their choose.

4) Abstract is a brief and accessible for the non specialist characteristic of article in terms of its purpose, content, type and form which allows to determine the main content of the article, to determine its relevance and to decide whether to refer to its full text. The abstract should be informative, meaningful (reflect the main content of article and results of researches) and structured (reflect logic description of the results in the article), should contain a general description of the research topic and the problem being solved, the object, and the aim of scientific research, description of the method of research, the description of scientific novelty and practical significance of the work, the main results and conclusions, the importance of the study, the contribution of paper into the corresponding field of knowledge. The subject, the theme and the aim of the work are mentioned if they are not clear from the title of the article. The abstract should not repeat the text of the article, as well as its name should not be numbers, formulas, tables, intratextual footnotes, references and abbreviations. The recommended average volume of abstract is 250-300 words (800-1000 characters).

5) Key words reflects the basic meaningful content of the article, serves as a guide for the reader and used to search for articles in electronic databases and refereed journals. They are chosen from the text of article in an amount of 4-10 words or collocations and should reflect the area of science in which the article is written, the subject, the purpose, and the object of the study.

6) Introduction briefly (no more than one page) disclose the nature and the state of scientific problem (task) in general, as well as its importance and connection with scientific and practical tasks, basis and initial data for the development of the theme, the justification of the study. The urgency (the degree of importance at the moment and in the given situation) and appropriateness of the article for the development of the relevant field of science or production briefly justified by the critical analysis and generalized comparison with known solutions of the problem. The object of study (process or phenomenon, generating a problematic situation and chosen for the study) and the subject of study (contained within the object) are described. The aim of the work and tasks that need to be addressed to achieve this aim are formulated (usually these statements starting with verbs: to develop, identify, justify, etc.). Introduction gives introductory information about theme of the article, which will enable the reader to understand and evaluate the results of the present study without further addressing other literature sources, describes the gaps and contradictions in research on problem to be solved.

7) Problem statement gives a clear formal mathematical formulation of solved problem: contains the source data (input variables) and the desired results (output variables), results quality evaluation criteria and constraints, necessary definitions. This section should not contain any analysis or interpretation of data and research.

8) Review of the literature contains theoretical core of the study. It briefly (no more than two pages), critically describes, evaluates and summarizes the work of predecessors (such as publications, which have begun to solve this problem, as well as recent publications), outlines the main stages in the development of scientific thought on problem to be solved, highlights the unsolved part of the overall problem and determines the place of the article in solving problem, justifies the choices of research areas. This section clarifies, concretizes, complements and extends the material of introduction and serves as its justification and explanation.

9) Materials and methods is a statement of basic material of research with full justification of received scientific results. General technique of research is described here in detail, so that the results can be reproduced: the sequence of the research is described, the selection of methods and models is substantiated, the essence of the proposed methods and models is presented, that which have been studied by each method is meaningfully determined. Selection of research methods should provide the accuracy of the results and conclusions, reliability and validity of the results. The theoretical information should extend rather than repeat the information contained in the introduction and in the literature review. Theoretical article describes the methods and analytical models of calculations and considered hypothesis. The experimental article describes the principles of operation and characteristics of the developed equipment, the experimentally obtained models, and the estimation of measurement errors. Previously published methods are listed with reference to the source only. The article describes in detail the proposed changes only.

10) Experiments: succinctly describes the general scheme of experiments, used equipment and the source data, so that any competent specialist could reproduce experiments in his laboratory, using only the text of the article.

11) Results are a representation of experimental or theoretical data obtained in the paper, demonstrating that the new problem solution is obtained, and that the work is a significant step forward in comparison with the previous studies. Data should be presented in the processed form (tables, graphs, diagrams, equations, photographs, drawings) with a description of that is shown in the illustrations, short summarizes comments and statistical estimates. The results should be presented clearly and concisely, with sufficient information to assess the reached conclusions. It should be obvious why the analysis of these data are selected. This section describes only the facts and analysis. The Interpretation and comparison with analogues should be described in the "Discussion" section. Theoretical papers include the results of research carried out by such methods of cognition as abstraction, synthesis, analysis, induction, deduction, formalization, idealization, modeling: the substantive provisions and ideas must be formulated, which will be further analyzed, with the subsequent conclusion. The empirical articles use a variety of theoretical methods, mainly based on practical methods of measurement, observation, experiment, etc. The articles based on computational work must specify the type of used finite element, boundary conditions and input parameters.

12) Discussion includes analysis, interpretation, and evaluation of reliability and significance of the results, but does not repeat them. Obtained results are compared with similar results of other authors. The similarities and differences with other studies are explained. The limits are specified and practical application of research results is proposed. The appropriateness of further research is justified. The discussion should be more theoretical, generalizing, abstract in comparison with the results.

13) Conclusions contain a brief (no more than one page) formulation of solved scientific problem (task), the most important received scientific and practical results that helped to solve a scientific problem, conclusions and recommendations on scientific and practical use of the results obtained, a description of the prospects (directions) for further research in this area. Scientific novelty of the results should be arranged as argued, briefly and clearly. Each scientific principle is formulated to determine the degree of novelty of the results (firstly obtained, improved, received further development), main essence of the principle, and differences of the obtained results from the previously known, indicating an effect that achieved (which allows to increase / decrease ...). Applied results (devices, techniques, schemes, and algorithms) can not be attributed to scientific novelty. Practical significance of the results describes how to use research findings or recommendations for their use. Conclusions should contain achieved qualitative and quantitative indicators of research, as well as recommendations for their use.

14) Acknowledgements express appreciation for the financial, organizational and technical support to individual people (listed by names indicating the position and organization) and organizations, and also reflect the article connection with the research projects, grants and scholarships (indicate the subject and the registration number of research work, as well as a source of funding).

15) Appendices, if necessary, provide additional material (intermediate proofs, formulas and calculations, auxiliary data tables). The title of the appendix give information that is material is appendix. If two or more appendices they must be numbered with capital letters. In this case, formulas, figures and tables in the appendices are numbered with the number of applications (for example, the formula (A.2) – the second formula in Appendix A, Table. B.1 – the first table in Appendix B). The editors have the right to use the appendices for article reviewing, but do not to publish them.

16) References (style - IEEE) contain a bibliographic description of the sources used in the preparation of the article. It is presented as numbered list of bibliography references in the original language in order of appearance of references in the text (Vancouver Numerical System). The works that have been cited in the text and published or accepted for publication (in the latter case, after describing the source lead phrase "in press") included in the list of references only.

Unpublished works cannot be included in the reference list, but may be mentioned in the text (described in the footnotes). Bibliographic description of sources make in accordance with current standards for librarianship and publishing (http://www.iso.org/iso/home/store/catalogue_ics/catalogue_detail_ics.htm?csnumber=43320, http://www.ifla.org/files/assets/cataloguing/isbd/isbd-cons_20110321.pdf, http://www.ifla.org/files/assets/cataloguing/isbd/isbd-examples_2013.pdf). Titles of journals should not be abbreviated. Numbers of references should be given in the article text for all the sources listed in the reference list. All sources listed in the reference list, In the text should be given reference numbers. Bibliographic description of each source in case of presence must be accompanied by its Digital Object Identifier (DOI), which provides a space after the bibliographic description of the source. DOI of sources you can find on this links: http://search.crossref.org/ or http://www.crossref.org/guestquery/ or http://www.crossref.org/SimpleTextQuery/. The bibliography should be correct (corresponding results should appear in a related article), accurate (correct number and page numbers, etc.), modern (describe recent advances in the investigated question) and historical (reflect the history of the question study), available (should not contain references to unpublished or unprintable works).

Examples of References:
1. Batygin Yuri V., Sergey F. Golovashchenko, Andrey V. Gnatov. Pulsed electromagnetic attraction of nonmagnetic sheet metals. Journal of Materials Processing Technology, 2014, Vol. 214, Issue 2, pp. 390-401. doi: 10.1016/j.jmatprotec.2013.09.018.
2. Brandão Faria J.A., Almeida M.E. Accurate calculation of magnetic-field intensity due to overhead power lines with or without mitigation loops with or without capacitor compensation. IEEE Transactions on Power Delivery, 2007, vol.22, no.2. pp. 951-959. doi: 10.1109/tpwrd.2006.883025.
3. Routimo M., Salo M., Tuusa H. Comparison of voltage-source and current-source shunt active power filters. IEEE Transactions on Power Electronics, 2007, no.2(22), pp. 636-643. doi: 10.1109/tpel.2006.890005.
4. Bolyukh V.F., Luchuk V.F., Rassokha M.A., Shchukin I.S. High-efficiency impact electromechanical converter. Russian electrical engineering, 2011, vol.82, no.2, pp. 104-110. doi: 10.3103/s1068371211020027.
5. Miller T.J.E. Optimal design of switched reluctanсe motors. IEEE Transactions on Industrial Electronics, 2002, vol.49, no.1, pp. 15-27. doi: 10.1109/41.982244.

text of the manuscript should not have handwritten corrections and notes. Discrepancies with the electronic version of the manuscript are not allowed. Article should not contain grammatical or other errors, and should correspond to the journal topics and to the requirements for specialized scientific publications.

The text of sections should be as simple as possible. The article should avoid unnecessary details, the intermediate formulas and conclusions; should not to bring the known facts and not to repeat the contents of tables and illustrations in the text. Author accents stand out exclusively in Italics, not underlined.

Point should not be made after the article title, section headings, table names, and dimensions (s – second, g – gram min – min). Point is placed after the footnotes (including tables), table notes, brief annotations and abbreviations.

Spaces are always placed between the initials and surname (for example: A. Ivanov). Abbreviations of multiple words are separated by spaces. Between the number or paragraph sign and the number the space used (for example, № 1, § 5.65).

Units are separated from number by a space (for example, 100 Pa, 77 K, 10.3 A), except degrees, percents, per mille: 90°, 20 °C, 50%. Quotes and parentheses are not separated by spaces from quoted words.

In enumerationas as well in numerical ranges the dimension should be given only for the last number (18-20 J/mol), except for the angular degrees. Angular degrees are never omitted: 5°-10°, rather than 5-10°. Celsius degrees: 5°C, instead of 5°.

All units and dimensions shall be given in the International System of Units (SI).

The numbers less than 11 must be written as words. Numbers greater than 11 and numbers less than 11 united with them in a single sentence must be written as digits. For numbers written with units should always be used only digits. All numbers in the mathematical sense must be written using the digits. The integer and fractional parts of numbers in Russian and in Ukrainian texts separated by the comma, and in English by the point. Decimal fraction less than one must always be preceded by a zero (for example, 0.123). It is advisable not to start sentences with numbers.
The ellipsis are used in mathematics to show the continuation of the expression, for example:
1) x1, x2, …, xn; 2) x1 + x2 + … +xn; 3) i = 0, 1, 2, …, K.
The lists must consist of more than one item. The number with a bracket or with a point must be placed before each list item, or without numbering the hyphen is used. If the list items continue sentence they must be separated by semicolons, before the list the colon is used after generalizing word and each element begins with a small letter. If the list items are the individual sentences, each of which begins with a capital letter and ends with a period.

The footnotes should be used only when absolutely necessary in the form of brief notes that do not fit conveniently into the text. Footnotes can not define abbreviations.

References to literature should be numbered consecutively in the text and identified by numbers in square brackets (for example: [1, 3-7]) and entered manually without using the built-in automation capabilities of the text processing software.

The References to figures and tables are typed with a space (for example: fig. 1, table 2). The numbers with letters in the notation of typed without spaces (fig. 1,b).
Illustrations (figures and tables) are placed directly after the text, where they are referred for the first time, or on the next page. All illustrations should be referenced in the article. The number of figures and tables should be not more than five to seven and the total volume not more than two or three pages. If the article is accompanied by a large amount of illustrative material, it is published a fragmentary. The author puts it in full at Internet website and the link to it puts in the text of a paper. Graphic illustrations must comply with standards of "Unified system construction documentation" (http://vsegost.com/Catalog/47/4712.shtml) and "Unified system for program documentation" (http://vsegost.com/Catalog/28/28346.shtml).

Figures (black and white or grayscale) are placed in the text, sequentially numbered and signed below, for example: "Fig. 1. The name", and additionally contributed in a separate files in jpg format with a resolution of 300 dpi. Each file must contain only one image and have a name like Fig_ #. jpg, where "#" is replaced by figure number. The figure size must not exceed the width of the page (15 cm). The inscriptions on the figures must be performed using font Times New Roman of 9 pt size. Figure captions should include an explanation of graphic and text designations should be included in the text, not into graphical files. If a particular figure consists of fragments, they must be marked with letters (a, b, c, etc.) and presented on the same page. The references to them are given in the text with an indication of a lowercase letter next to the number of a figure (for example, fig. 1,a, fig. 2,b).

Tables laconically represent numeric or factual information in a grid format. Tables created using the capabilities of MS Word (Table / Insert Table), placed in the text, numbered sequentially and captioned at the top (for example, "Table 1 – Name"). The references to tables in the text must be given with the number (for example, table 1). Typically, the table contains at least two rows (including the column headings), and two columns. Otherwise, the information can be better represented as a list. Units should be given in the column headers, and not repeated for each record in the table body. A table containing graphics (e.g., arrows in the flowchart) is probably better considered as drawing, although sometimes the drawings can be embedded into a table (e.g., chemical structures). Tables typed as a text (using a large number of spaces, without using cells) cannot be used.

Formulas placed directly after the text in which they addressed and typed using the Microsoft Equation 3.0 editor built in Microsoft Word. Formulas numbered in parentheses on the right side if they are referenced in the text. Large size formulas are written in a few lines. Variables in the text and formulas italicized if they are presented in Latin letters. Greek letters and symbols of operators and functions (min, max, sin, cos, tg, ctg, etc.) do not italicized. In formulas and mathematical notation it is prohibited to use Cyrillic letters. Explanation of symbols and values of the numerical coefficients, which are included in the formula must be given in section "Nomenclature".