RELATIONSHIP BETWEEN PROCESSING TEMPERATURE AND INTERRUPTION IN THE GRINDING PROCESS
DOI:
https://doi.org/10.20998/2078-7405.2020.93.14Keywords:
intermittent grinding, vibrations during grinding, trajectory of movement, hit, surface profile, grinding temperatures.Abstract
This article discusses issues related to the processing of grinding wheels with an intermittent working surface and their influence on the grinding process. To solve this problem, it was necessary to first identify the relationship between the discontinuity of the process and the shock load. Next, determine the trajectory of movement of the forming point of the circle. A diagram of the movement of the center of mass of the circle and the forces acting on it is constructed. Equations are derived that determine these displacements. A system of equations describing the movement of the spindle axis under the action of cutting forces and power imbalance of the wheel is presented. The relationship between the frequency, amplitude of forced vibrations and displacements of the axis under the action of a harmonic disturbing force has been established. Theoretical calculations are confirmed by practical results. Based on the movement of the forming point of the circle, the parameters of the profile of the machined surface are set. The influence of the discontinuity of the process on the grinding temperature is considered.References
Novoselov YU.K. Dinamika formoobrazovaniya poverkhnostey pri abrazivnoy obrabotke: Monografiya / YU. K. Novoselov. - Sevastopol': SevNTU, 2012. - 304 p.
Suslov A.G. Nauchnyye osnovy tekhnologii mashinostroyeniya [Tekst] / A. G. Suslov, A. M. Dal'skiy. – Moscow : Mashinostroyeniye, 2002. – 684 p.
Naddachin V.B. Ispol'zovaniye vibratsiy pri preryvistom protsesse rezaniya [Tekst] / V. B. Naddachin, A. V. Babyuk // Sb.NT Obrabotka dispersnykh materialov i sred. Teoriya, issledovaniya, tekhnologii, oborudovaniye. – Odessa : NPO «Votum», 2002. – Vyp. №12. –
pp. 126-130.
Biderman V.L. Teoriya mekhanicheskikh kolebaniy [Tekst] / V. L. Biderman. – Moscow : Vysshaya shkola, 1980. – 408 p.
Naddachin V.B. Vliyaniye vibratsiy na parametry kolebaniy abrazivnogo instrumenta [Tekst] / V. B. Naddachin, A. V. Balanyuk //Novyye i netraditsionnyye tekhnologii v resurso- i energosberezhenii. Sb. MNTK 19-22.09.2011 g. Odessa. – Kyiv, 2011 – pp. 145-147.
Prilutskiy V.A. Tekhnologicheskoye obespecheniye tochnosti i kachestva poverkhnostnogo sloya detaley mashin putem upravleniya periodicheskimi pogreshnostyami obrabotki [Tekst] : avtoref. dis. … d.t.n. : 05.02.08 / V. A. Prilutskiy ; [Bryanskiy gos. tekhn. un-t] . – Bryansk, 2004. – 36 p.
Downloads
Published
Issue
Section
License
Copyright Notice
Authors who publish with this Collection agree to the following terms:
1. Authors retain copyright and grant the Collection right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this Collection.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the Collection's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this Collection.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
