MAIN TECHNOLOGICAL FACTORS DETERMINING THE EFFICIENCY AND QUALITY OF THE VIBRATION PROCESS

Authors

DOI:

https://doi.org/10.20998/2078-7405.2022.96.14

Abstract

The factors that determine the efficiency and quality of vibration treatment are indicated. Characteristic cases of interaction of abrasive granules with the processed surface are noted. The influence of the hardness of the processed part material and the shape of its surface, as well as the influence of chemically active solutions on the efficiency and quality of vibration processing, is substantiated. The characteristics of abrasive granules and their volume ratio with the processed parts are given. It is indicated that the underestimation of the possibilities of vibration processing technologies is explained by their insufficient studies. It has been established that vibration processing, depending on the characteristics and composition of the processing medium, is a mechanical or mechanochemical removal of the smallest particles of metal or its oxides and plastic deformation of microroughness due to mutual collisions of the medium granules with the processed surface, caused by vibrations of the reservoir in which the processing medium and, the processed parts are placed. It is noted that, according to the classification, vibration treatment refers to mechanical processing methods and, in particular, to the group of mechanical-chemical processing methods or to combined methods when chemically active solutions are introduced into the working medium, It is also noted that vibration treatment refers to dynamic, and for technological purposes – to dimensionless processing methods, according to the type of tool used - to the group of processing methods with a free abrasive. It has been established that the efficiency of vibration processing depends on the oscillation modes of the vibrating machine, the mass of the processed parts and abrasive granules, the hardness of the parts material and the shape of their treated surfaces, the characteristics of the abrasive medium, the volume ratio of the parts and abrasive granules, as well as on the composition of the chemically active solution. The characteristic cases of interaction of abrasive granules with the processed surface are given. The situations of the highest processing productivity for performing the operations of vibration grinding, vibration polishing, washing and descaling have been established. It is noted how the hardness of the processed part and the shape of their surface affects the performance and quality of vibration processing operations. The characteristics of the working medium, which affects the efficiency and quality of vibration treatment, are given, including the influence of grain size and hardness of the material of abrasive granules. The volume ratios of abrasive and processed parts are considered. The types of actions on the vibration treatment processes are given.

Author Biographies

Mitsyk Andrii , Volodymyr Dahl East Ukrainian National University (Severodonetsk)

PhD (Candidate of technical sciences), Professor (Associate), Department Machinery engineering and applied mechanics, Volodymyr Dahl East Ukrainian National University (Severodonetsk)

Fedorovich Vladimir, National Technical University "Kharkiv Polytechnic Institute", Kharkiv

Dr. Tech. Sciences, Professor of the Department "Integrated Technologies of Mechanical Engineering named after MF Semko", National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine

Grabchenko Anatoliy, National Technical University "Kharkiv Polytechnic Institute", Kharkiv

Dr. Tech. Sciences, Professor of the Department "Integrated Technologies of Mechanical Engineering named after MF Semko", National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine

References

Babichev A.P. Osnovy vibracionnoj tehnologii / A.P. Babichev, I.A. Babichev. Rostov-n/D: Izdatel’skij centr DGTU, 2008. 694 p.

Kartashov I.N. Obrabotka detalej svobodnymi abrazivami v vibrirujushhih rezervuarah / I.N. Kartashov, M.E. Shainskij, V.A. Vlasov. Kyiv: Vishha shkola, 1975. 188 p.

Mamalis, A.G., Grabchenko, A.I., Mitsyk, A.V., Fedorovich, V.A., Kundrák, J. Mathematical simulation of motion of working medium at finishing – grinding treatment in the oscillating reservoir. The International Journal of Advanced Manufacturing Technology 70, pp. 263 – 276 (2014). https://doi.org/10.1007/s00170-013-5257-6

Politov I.V., Kuznecov N.A. Vibracionnaja obrabotka detalej mashin i priborov. Leningrad: Lenizdat, 1965. 125 p.

Mіtsyk A.V., Fedorovich V.O. Osoblivostі tehnologіj vidalennja zadirok, skruglennja і polіruvannja gostrih kromok pri vіbracіjnіj ozdobljuval'no-zachishhuval'nіj obrobcі detalej. Vazhke mashinobuduvannja. Problemi ta perspektivi rozvitku: tezi dopovіdej XIX mіzhnar. nauk.-tehn. konf. (m. Kramators'k, 1 – 4 chervnja 2021 r.). Kramators'k, DDMA, 2021. pp. 105 – 106.

Kundrák J., Mitsyk A.V., Fedorovich V.A., Markopoulos A.P., Grabchenko A.I. Simulation of the Circulating Motion of the Working Medium and Metal Removal during Multi-Energy Processing under the Action of Vibration and Centrifugal Forces. Machines Vol. 9 (6) 118, pp. 1 – 22, (2021). https://doi.org/10.3390/machines9060118

Mitsyk A.V., Fedorovich V.A., Grabchenko А.І. The effect of a shock wave in an oscillating working medium during vibration finishing-grinding processing. Cutting & Tools in Technological System. Kharkiv, NTU «KhPI», 2020. № 93. pp. 62 – 67. http://doi.org/10.20998/2078-7405.2020.93.06

Іnstrument dlja obrobki detalej vіl'nimi abrazivami: monografіja / M.O. Kalmykov, T.O. Shumakova, V.B. Strutins'kij, L.M. Lubens'ka; Kyiv – Luhans'k: «Noulіdzh», 2010. 214 p.

Lubens'ka L.M., Strutins'kij V.B., Jasunіk S.M., Kalmykov M.O., Ozdobljuval'no-abrazivnі metodi obrobki: pіdruchnik. Luhans'k – Kyiv: Vid-vo «Noulіdzh», 2011. 268 p.

Venckevich Gzhegozh Vlijanie nekotoryh parametrov abrazivnogo napolnitelja na jeffektivnost' processa shlifovanija v vibrirujushhih rezervuarah: dis. … kand. tehn. nauk: 05.02.08 / OPI. Odessa, 1986. 175 p.

Obrobka u vіl'nih abrazivah: monografіja / Branspіz O.V., Kalmykov M.O., Jasunіk S.M. Luhans'k: «Noulіdzh», 2010. 318 p.

Primenenie vibracionnyh tehnologij na operacijah otdelochno-zachistnoj obrabotki detalej (ochistka, mojka, udalenie obloja i zacsencev, obrabotka kromok): monografija / Babichev A.P., Motrenko P.D., Gillespi L.K. i dr.; pod red. A.P. Babicheva. Rostov-na-Donu: Izd-vo DGTU, 2010. 289 p.

Otdelochno-uprochnjajushhaja obrabotka detalej mnogokontaktnym vibroudarnym instrumentom / A.P. Babichev, P.D. Motrenko, I.A. Babichev i dr.; pod red. A.P. Babicheva. Rostov n/D: Izdatel'skij centr DGTU, 2003. 213 p.

Primenenie vibracionnyh tehnologij dlja povyshenija kachestva poverhnosti i jekspluatacionnyh svojstv detalej / A.P. Babichev, P.D. Motrenko, V.A. Lebedev i dr.; pod red. A.P. Babicheva. Rostov n/D: Izdatel'skij centr DGTU, 2006. 213 p.

Bereshhenko A.A. Vibrohimicheskaja obrabotka uglerodistyh i legirovannyh stalej: dis. … kand. him. nauk: 05.17.03 / Institut obshhej i neorganicheskoj himii AN USSR. Kyiv, 1980. 132 p.

Downloads

Published

2022-03-02

Issue

Section

Mechanical processing of materials, the theory of cutting materials, mathematical and computer simulation of machining p