No. 98 (2023): Cutting and Tools in Technological Systems

The collection publishes scientific articles, which cover current issues in the field of machining of modern materials using high-performance technologies, new methods and measuring instruments to control the quality of treated surfaces and high-performance cutting tools. Aspects of optimization and mathematical modeling at different stages of the technological process are covered.

Published: 2023-05-25

Full Issue

PDF_000

Mechanical processing of materials, the theory of cutting materials, mathematical and computer simulation of machining p

REGULARITIES OF VIBRATION FINISHING AND GRINDING PROCESSING AND DIRECTIONS OF IMPROVEMENT OF ITS INTENSITY AND QUALITY

Mitsyk Andrii , Fedorovich Vladimir

41-48
- PDF_04
DETERMINATION OF RELIABLE AREA SIZES FOR 3D ROUGHNESS MEASUREMENT

Zaghal Jawad, Benke Márton

3-12
- PDF_01
MODERN DEVELOPMENTS RELATED TO THE DIRECTED IMPACT ON THE CUTTING SURFACE OF A DIAMOND ABRASIVE TOOL AND ITS CONTACT ZONE IN THE PROCESSES OF MACHINING (REVIEW)

Lavrinenko Valerii, Fedorovich Vladimir, Ostroverkh Yevgeniy, Solod Volodymyr

13-29
- PDF_02
OPTIMISATION OF INTERRUPTED GRINDING PARAMETERS ACCORDING TO THE TEMPERATURE CRITERION

Nоvikоv Fеdir

59-72
- PDF_06
ANALYZING SURFACE INTEGRITY ELEMENTS OF HARD TURNED 16MNCR5 STEEL

Molnár Viktor

49-58
- PDF_05
ANALYSIS OF SELECTED FUNCTION-DEFINING 2D SURFACE ROUGHNESS PARAMETERS IN TANGENTIAL TURNING

Sztankovics István

109-115
- PDF_11
ROUNDNESS ERROR AND TOPOGRAPHY OF HARD TURNED SURFACES

Sultana Jakiya, Sztankovics István

83-92
- PDF_08
INCREASING THE ACCURACY OF DEFECTOSCOPY BY THE METHOD OF ACTIVE THERMOGRAPHY OF PRODUCTS MADE OF NON-METALLIC HETEROGENEOUS MATERIALS AND USED IN ENGINEERING

Tonkonogyi Vladimir, Stanovskyi Oleksandr , Holofieieva Maryna, Levynskyi Oleksandr, Klimov Serhiy

101-108
- PDF_10
EXPERIMENTAL INVESTIGATION OF TRIBOLOGY-RELATED SURFACE TOPOGRAPHY PARAMETERS AND HARDNESS OF 16MNCR5 CASE HARDENED STEEL

Nagy Nora

73-82
- PDF_07
INVESTIGATION OF FACE MILLED SURFACE TOPOGRAPHY ON C45 WORKPIECE ASSUMING MOVEMENT AT 30° AND 60° TO FEED DIRECTION

Nagy Antal, Janos Kundrak

116-127
- PDF_12

Organization of production (production process). Production planning.

IMPROVING THE EFFICIENCY OF MAINTENANCE PROCESS IN MANUFACTURING SYSTEMS USING INDUSTRY 4.0 TOOLS

Hermans Marc, Tamás Péter

93-100
- PDF_09
OPTIMISATION OF OPERATOR-MACHINE ASSIGNMENT PROBLEM USING EXCEL SOLVER

Bányai Tamás, Meczkó Viktória

30-40
- PDF_03

No. 98 (2023): Cutting and Tools in Technological Systems

Full Issue

Mechanical processing of materials, the theory of cutting materials, mathematical and computer simulation of machining p

REGULARITIES OF VIBRATION FINISHING AND GRINDING PROCESSING AND DIRECTIONS OF IMPROVEMENT OF ITS INTENSITY AND QUALITY

DETERMINATION OF RELIABLE AREA SIZES FOR 3D ROUGHNESS MEASUREMENT

MODERN DEVELOPMENTS RELATED TO THE DIRECTED IMPACT ON THE CUTTING SURFACE OF A DIAMOND ABRASIVE TOOL AND ITS CONTACT ZONE IN THE PROCESSES OF MACHINING (REVIEW)

OPTIMISATION OF INTERRUPTED GRINDING PARAMETERS ACCORDING TO THE TEMPERATURE CRITERION

ANALYZING SURFACE INTEGRITY ELEMENTS OF HARD TURNED 16MNCR5 STEEL

ANALYSIS OF SELECTED FUNCTION-DEFINING 2D SURFACE ROUGHNESS PARAMETERS IN TANGENTIAL TURNING

ROUNDNESS ERROR AND TOPOGRAPHY OF HARD TURNED SURFACES

INCREASING THE ACCURACY OF DEFECTOSCOPY BY THE METHOD OF ACTIVE THERMOGRAPHY OF PRODUCTS MADE OF NON-METALLIC HETEROGENEOUS MATERIALS AND USED IN ENGINEERING

EXPERIMENTAL INVESTIGATION OF TRIBOLOGY-RELATED SURFACE TOPOGRAPHY PARAMETERS AND HARDNESS OF 16MNCR5 CASE HARDENED STEEL

INVESTIGATION OF FACE MILLED SURFACE TOPOGRAPHY ON C45 WORKPIECE ASSUMING MOVEMENT AT 30° AND 60° TO FEED DIRECTION

Organization of production (production process). Production planning.

IMPROVING THE EFFICIENCY OF MAINTENANCE PROCESS IN MANUFACTURING SYSTEMS USING INDUSTRY 4.0 TOOLS

OPTIMISATION OF OPERATOR-MACHINE ASSIGNMENT PROBLEM USING EXCEL SOLVER

Information

Developed By