QUALITY MANAGEMENT OF CUTTING TOOLS ON HEAVY MACHINES

Authors

DOI:

https://doi.org/10.20998/2078-7405.2021.94.15

Keywords:

quality management, cutting tool, machines, rational operation of the tool, system approach, quality system

Abstract

The work is devoted to improving the efficiency of cutting tools on heavy machines by developing a quality management system for its operation, determining rational operating regulations and developing general machine-building standards for cutting. The developed model of the tool operation control system for the first time allowed to systematically consider the structure and relationships of all components of the process. The qualimetric approach to the tool operation process made it possible to develop methods for quantitative assessment of the process quality and substantiate the structure of the preparatory information subsystem.

Author Biographies

Galyna Klymenko, Donbass State Engineering Academy, Kramatorsk

Doctor of Technical Sciences, Professor, Head of the Department of Automation Industrial Processes, DSEA (Donbass State Engineering Academy), Kramatorsk, Ukraine

Yana Vasylchenko, Donbass State Еngineering academy, Kramatorsk

Doctor of Technical Sciences, Associate Professor, Head of Department of computerized mechatronic systems, tools and technologies, Donbass State Еngineering academy, Kramatorsk, Ukraine

Yevheniia Donchenko , Donbass State Engineering Academy, Kramatorsk

Senior Lecturer at the Department of Automation of Production Processes, Donbass State Engineering Academy, Kramatorsk, Ukraine

References

Klimenko G.P. Definition of a degree of quality of operation of the cutting tool on heavy machine tools // the Bulletin of National technical university of Ukraine "КПІ": Machine-building.-Kiev: NTUU " КПІ ", 2001.-№.40.- p.337-346

Klimenko G.P. Management of quality of process of operation of the cutting tool on heavy machine tools // High technologies in mechanical engineering. The collection of scientific works NTU "ХПІ".- Kharkov, 2002.- № 1 (5).-p.157-160

Kovalov V., Vasilchenko Y., Dašić P. Development of the integral complex of optimal control of heavy machine tools adaptive technological system for wind-power engineering parts // 8th International Conference Interdisciplinarity in Engineering, INTER-ENG 2014, 9-10 October 2014, Tirgu Mures, Romania Volume 9, 2015, pp. 145-152 https://doi.org/10.1016/j.protcy.2015.02.022

Jedrzejewski, J., Kwasny, W. Development of machine tools design and operational properties. Int J Adv Manuf Technol 93, 1051–1068 (2017). https://doi.org/10.1007/s00170-017-0560-2

Jihong Chen, Jianzhong Yang, Huicheng Zhou, Hua Xiang, Zhihong Zhu, Yesong Li, Chen-Han Lee, Guangda Xu, CPS Modeling of CNC Machine Tool Work Processes Using an Instruction-Domain Based Approach, Engineering, Volume 1, Issue 2, 2015, Pages 247-260, ISSN 2095-8099, https://doi.org/10.15302/J-ENG-2015054

Yanjun Han, Wu-Le Zhu, Lei Zhang, Anthony Beaucamp, Region adaptive scheduling for time-dependent processes with optimal use of machine dynamics, International Journal of Machine Tools and Manufacture, Volume 156, 2020, 103589, ISSN 0890-6955, https://doi.org/10.1016/j.ijmachtools.2020.103589

Koji Utsumi, Shoki Shichiri, Hiroyuki Sasahara, Determining the effect of tool posture on cutting force in a turn milling process using an analytical prediction model, International Journal of Machine Tools and Manufacture, Volume 150, 2020, 103511, ISSN 0890-6955, https://doi.org/10.1016/j.ijmachtools.2019.103511

Umut Karagüzel, Emre Uysal, Erhan Budak, Mustafa Bakkal, Analytical modeling of turn-milling process geometry, kinematics and mechanics, International Journal of Machine Tools and Manufacture, Volume 91, 2015, Pages 24-33, ISSN 0890-6955, https://doi.org/10.1016/j.ijmachtools.2014.11.014

Kovalov V., Vasilchenko Y., Turmanidze R., Dašić P., Sukova T., Shapovalov M. The technique of designing high-power CNC lathes for enterprises of the heavy engineering industry. IOP Conference Series: Materials Science and Engineering, Vol. 568 (2019) (Special Volume with: Annual Session of Scientific Papers "IMT ORADEA 2019"; Oradea, Felix Spa; Romania; 30-31 May 2019), Article no. 012119: pp. 1-6. ISSN 1757-8981. https://doi.org/10.1088/1757-899X/568/1/012119

G. Klymenko,Y. Vasylchenko.

V. Kvashnin Modeling of cutting tools wear for lathes. Cutting & Tools in Technological System ISSN: 2078-7405 No 93 (2020) P.138-148. https://doi.org/10.20998/2078-7405.2020.93.15

Downloads

Published

2021-06-16

Issue

Section

Mechanical processing of materials, the theory of cutting materials, mathematical and computer simulation of machining p