Editorial Team

Editors

Юлія Миколаївна Главчева, Ukraine

Yevgeniy Ostroverkh, National Technical University “KhPI”, Kharkiv, Ukraine, Ukraine

Anatoly Ivanovich Grabchenko, National Technical University “KhPI”, Kharkiv, Ukraine

Volodymyr Kalchenko, Chernihiv National University of Technology, Chernihiv, Ukraine

Janos Kundrak, UNIVERSITY OF MISKOLC Faculty of Mechanical Engineering and Informatics Institute of Manufacturing Science, Hungary, Hungary

Volodimir Fedorovich, National Technical University “KhPI”, Kharkiv, Ukraine;, Ukraine

Sergii Byelikov, Zaporizhzhya Politechnik National University, Ukraine

William Zaloga, Sumy State University, Sumy, Ukraine, Ukraine

Victor Antonyuk, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Ukraine

Volodimir Tonkonogii, Odessa National Polytechnic University, Odessa, Ukraine;, Ukraine

Vadym Stupnytskyy, Lviv Polytechnic National University, Lviv, Ukraine, Ukraine

Raul Turmanidze, Georgian Technical University, Georgia Assoc., Georgia

Athanasios G. Mamalis, National Center Scientific Research “Demokritos”, Athens, Greece, Greece

Vitalii Ivanov, Sumy State University, Sumy, Ukraine, Ukraine

Yevheniia Basova, National Technical University "Kharkiv Polytechnic Institute", Ukraine

Oleksandr Permyakov, National Technical University “KhPI”, Kharkiv, Ukraine, Ukraine

Angelos P. MARKOPOULOS, National Technical University of Athens, Heroon Polytechniou 9, 15780 Athens, Greece., Greece

Balázs MIKÓ, Óbuda University, Budapest, Bánki Donát Faculty of Mechanical and Safety Engineering Institute of Material and Manufacturing Science Department of Manufacturing Engineering, Hungary, Hungary

Gennadiy Khavin, National Technical University “KhPI”, Kharkiv, Ukraine, Ukraine

Larisa Pupan, National Technical University “KhPI”, Kharkiv, Ukraine, Ukraine

Maryna Ivanova, National Technical University “KhPI”, Kharkiv, Ukraine, Ukraine

Valery Lavrinenko, V.N.Bakul Institute for Superhard Materials National Academy of Sciences of Ukraine, Ukraine

Ivan Pavlenko, State University, Sumy, Ukraine;, Ukraine

Predrag Dasic, High Technical School of Professional Studies in Trstenik, Serbia, Serbia

Domenico Guida, University of Salerno, Italy (Universita degli Studi di Salerno: Fisciano, Campania), Italy

Vlatko Marusic, Universiy of Josip Juraj Strossmayer in Osijek, Strojarski fakultet u Slavonskom Brodu, Head of Department for Materials Engineering and Head of Laboratory for Materials Testing, Croatia, Croatia

Dragoljub Mirjanic, University of Banska Luka, Serbia, Bosnia and Herzegovina

Thomas Emmer, Otto von Guericke University of Magdeburg, Germany, Germany

Justyna Trojanowska, Poznan University of Technology, Poland, Poland

Milan Edl, University of West Bohemia, Czech Republic, Czechia

Michal Hatala, The Technical University of Kosice, Faculty of Manufacturing Technologies with a seat in Presov, Slovakia, Slovakia

Sergey Dobrotvorskiy, National Technical University "Kharkiv Polytechnic Institute", Department of Manufacturing Engineering, Machines and Tools, Ukraine

Olaf Ciszak, Poznan University of Technology, Poland

Csaba Felhő, University of Miskolc, Hungary, Faculty of Mechanical Engineering and Informatics, Institute of Manufacturing Science, Hungary

Ildiko Mankova, Technical University of Kosice. Faculty of Mechanical Engineering, Department of Computer Aided Production, Slovakia, Slovakia

Ivan Pyzhov, National Technical University “KhPI”, Kharkiv, Ukraine, Ukraine

Volodymyr Dobroskok, National Technical University “KhPI”, Kharkiv, Ukraine, Ukraine

Dmytro Krivoruchko, Sumy State University, Sumy, Ukraine

Volodymyr Volkohon, Institute for Problems of Materials Science National Academy of Sciences in Ukraine, Kyiv, Ukraine

пані Дагмар Каганова, MTF STU in Trnava, Faculty of Materials Science and Technology STU in Trnava, Slovakia

Наталія Хорнакова, Faculty of Materials Science and Technology STU in Trnava, Slovakia

Пан Петер Тамаш, UNIVERSITY OF MISKOLC, Hungary

Анатолій Васильович Усов, Ukraine

Віктор Дмитрович Ковальов, Donbass State Machine-Building Academy, Kramatorsk, Ukraine

Section Editors

Вадим Володимирович Ступницький, Ukraine

Роман Михайлович Тріщ, Ukrainian Engineering and Pedagogical Academy str. University, 16, Kharkov, 61003, Ukraine

Евгения Басова

Alexander Permyakov, National Technical University «Kharkіv Polytechnic Institute», 2, Kyrpychova str., Kharkiv, Ukraine, 61002, Ukraine

Yevgeniy Ostroverkh, National Technical University “KhPI”, Kharkiv, Ukraine, Ukraine

Anatoly Ivanovich Grabchenko, National Technical University “KhPI”, Kharkiv, Ukraine

Володимир Віталійович Кальченко, Ukraine

Janos Kundrak, UNIVERSITY OF MISKOLC Faculty of Mechanical Engineering and Informatics Institute of Manufacturing Science, Hungary, Hungary

Volodimir Fedorovich, National Technical University “KhPI”, Kharkiv, Ukraine;, Ukraine

Sergii Byelikov, Zaporizhzhya Politechnik National University, Ukraine

William Zaloga, Sumy State University, Sumy, Ukraine, Ukraine

Victor Antonyuk, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Ukraine

Volodimir Tonkonogii, Odessa National Polytechnic University, Odessa, Ukraine;, Ukraine

Raul Turmanidze, Georgian Technical University, Georgia Assoc., Georgia

Athanasios G. Mamalis, National Center Scientific Research “Demokritos”, Athens, Greece, Greece

Vitalii Ivanov, Sumy State University, Sumy, Ukraine, Ukraine

Angelos P. MARKOPOULOS, National Technical University of Athens, Heroon Polytechniou 9, 15780 Athens, Greece., Greece

Balázs MIKÓ, Óbuda University, Budapest, Bánki Donát Faculty of Mechanical and Safety Engineering Institute of Material and Manufacturing Science Department of Manufacturing Engineering, Hungary, Hungary

Gennadiy Khavin, National Technical University “KhPI”, Kharkiv, Ukraine, Ukraine

Larisa Pupan, National Technical University “KhPI”, Kharkiv, Ukraine, Ukraine

Maryna Ivanova, National Technical University “KhPI”, Kharkiv, Ukraine, Ukraine

Valery Lavrinenko, V.N.Bakul Institute for Superhard Materials National Academy of Sciences of Ukraine, Ukraine

Ivan Pavlenko, State University, Sumy, Ukraine;, Ukraine

Predrag Dasic, High Technical School of Professional Studies in Trstenik, Serbia, Serbia

Domenico Guida, University of Salerno, Italy (Universita degli Studi di Salerno: Fisciano, Campania), Italy

Vlatko Marusic, Universiy of Josip Juraj Strossmayer in Osijek, Strojarski fakultet u Slavonskom Brodu, Head of Department for Materials Engineering and Head of Laboratory for Materials Testing, Croatia, Croatia

Dragoljub Mirjanic, University of Banska Luka, Serbia, Bosnia and Herzegovina

Thomas Emmer, Otto von Guericke University of Magdeburg, Germany, Germany

Justyna Trojanowska, Poznan University of Technology, Poland, Poland

Milan Edl, University of West Bohemia, Czech Republic, Czechia

Michal Hatala, The Technical University of Kosice, Faculty of Manufacturing Technologies with a seat in Presov, Slovakia, Slovakia

Sergey Dobrotvorskiy, National Technical University "Kharkiv Polytechnic Institute", Department of Manufacturing Engineering, Machines and Tools, Ukraine

Olaf Ciszak, Poznan University of Technology, Poland

Csaba Felhő, University of Miskolc, Hungary, Faculty of Mechanical Engineering and Informatics, Institute of Manufacturing Science, Hungary

Ildiko Mankova, Technical University of Kosice. Faculty of Mechanical Engineering, Department of Computer Aided Production, Slovakia, Slovakia

Ivan Pyzhov, National Technical University “KhPI”, Kharkiv, Ukraine, Ukraine

Volodymyr Dobroskok, National Technical University “KhPI”, Kharkiv, Ukraine, Ukraine

Dmytro Krivoruchko, Sumy State University, Sumy, Ukraine

Volodymyr Volkohon, Institute for Problems of Materials Science National Academy of Sciences in Ukraine, Kyiv, Ukraine

пані Дагмар Каганова, MTF STU in Trnava, Faculty of Materials Science and Technology STU in Trnava, Slovakia

Наталія Хорнакова, Faculty of Materials Science and Technology STU in Trnava, Slovakia

Пан Петер Тамаш, UNIVERSITY OF MISKOLC, Hungary

Анатолій Васильович Усов, Ukraine

Віктор Дмитрович Ковальов, Donbass State Machine-Building Academy, Kramatorsk, Ukraine