ANALYSIS OF PARAMETERS OF LASER-INDUCED PERIODIC MICROSTRUCTURES (LIPSS) ON THE SURFACE OF STAINLESS STEEL USING AUTOCORRELATION FUNCTIONS

Authors

DOI:

https://doi.org/10.20998/2078-7405.2025.102.03

Keywords:

laser processing, LIPSS, autocorrelation analysis, microstructure

Abstract

In modern mechanical engineering, the control of surface quality of components, which directly affects their operational characteristics, is becoming increasingly important. One of the key aspects is the analysis of surface microstructure, particularly its periodicity, as it determines properties such as wear resistance and corrosion resistance. Laser processing is one of the promising technologies that allows the formation of regular microstructures, such as LIPSS (Laser-Induced Periodic Surface Structures). Despite extensive research, the mechanism of LIPSS formation remains not fully understood, and the results often show variable periodicity and orientation. To accurately analyze these structures, mathematical and statistical methods, such as two-dimensional autocorrelation analysis (ACF) and fast Fourier transform (FFT), are required. This study proposes a methodology for evaluating the periodicity of microstructures obtained during laser treatment of metallic samples, using digital video microscopy. The application of two-dimensional autocorrelation and spectral analysis within the Gwyddion environment ensures reproducible and objective assessment of microstructures, while demonstrating the effectiveness of ACF for surface topography analysis. The obtained data show the presence of pronounced periodicity in the studied microstructure and confirm the complexity of the LIPSS formation mechanisms, contributing to accurate quantitative analysis and adaptive control of laser modification processes.

Author Biographies

Saprykina Emiliia, National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine

Master's Degree, Department «Technology of Mechanical Engineering and Metal-Cutting Machines», National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine

Dobrotvorskyi Sergiy , National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine

Doctor of Engineering Sciences, Professor, Department «Technology of Mechanical Engineering and Metal-Cutting Machines», National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine

Aleksenko Borys, National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine

Candidate Of Technical Sciences, Department «Technology of Mechanical Engineering and Metal-Cutting Machines», National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine

Trubín Dmytro, National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine

Postgraduate, Department «Technology of Mechanical Engineering and Metal-Cutting Machines», National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine

Moskal Denys, University of West Bohemia, Czech Republic

Master's Degree, PhD, Research team "Infrared Technologies", Faculty of Applied Sciences, University of West Bohemia, Czech Republic

Martan Jiri, University of West Bohemia, Pilsen, Czech Republic

Ph.D., Research team "Infrared Technologies", Head of the scientific group of laser microprocessing and thermal diagnostics, Faculty of Applied Sciences, University of West Bohemia, Pilsen, Czech Republic

References

Abellán-Nebot, J.V., Vila Pastor, C. and Siller, H.R. A Review of the Factors Influencing Surface Roughness in Machining and Their Impact on Sustainability. Sustainability, [online] 16(5), 2024, p.1917. https://doi.org/10.3390/su16051917.

Xu, J., Yu, H., Xiao, R., Liu, Q. and Chen, S. Features detection of Al alloy porosity during GTAW process based on arc spectrum and improved porosity-focus decision tree. Journal of Manufacturing Processes, [online] 88, 2023, pp.71–83. https://doi.org/10.1016/j.jmapro.2023.01.015.

Sidor, J.J. Quantitative Indicators of Microstructure and Texture Heterogeneity in Polycrystalline System. Materials, [online] 17(24), 2024, pp.6057–6057. https://doi.org/10.3390/ma17246057.

Grajcar, A., Aleksandra Kozłowska, Krzysztof Radwański and Skowronek, A. Quantitative Analysis of Microstructure Evolution in Hot-Rolled Multiphase Steel Subjected to Interrupted Tensile Test. Metals, [online] 9(12), 2019, pp.1304–1304. https://doi.org/10.3390/met9121304.

Jin, Z.-Z., Zha, M., Wang, H.-Y., Ma, J.-G. and Liu, Y.-C. Achieving remarkable enhancement of yield strength and high ductility in a fine-grained Mg-6Zn-0.2Ca alloy via rotated hard-plate rolling. Materials & Design, 234, 2023, p.112345. https://doi.org/10.1016/j.matdes.2023.112345.

Senuma, T., Okayasu, M. and Mohrbacher, H. Microstructural Control and Alloy Design for Improving the Resistance to Delayed Fracture of Ultrahigh-Strength Automotive Steel Sheets. Metals, [online] 13(8), 2023, p.1368. https://doi.org/10.3390/met13081368.

Mojtaba Karamimoghadam, Rezayat, M., Moradi, M., Mateo, A. and Casalino, G. Laser Surface Transformation Hardening for Automotive Metals: Recent Progress. Metals, 14(3), 2024, pp.339–339. https://doi.org/10.3390/met14030339.

Tien, T.-C., Hsieh, T.-E., Lee, Y.-S., Wang, Y.-H. and Lee, M.-L. Electrical and Hysteresis Characteristics of Top-Gate InGaZnO Thin-Film Transistors with Oxygen Plasma Treatment Prior to TEOS Oxide Gate Dielectrics. Coatings, 12(3), 2022, pp.383–383. https://doi.org/10.3390/coatings12030383.

Sun, Y., Gao, B., Hu, L., Li, K. and Zhang, Y. Effect of CeO2 on Corrosion Resistance of High-Current Pulsed Electron Beam Treated Pressureless Sintering Al-20SiC Composites. Coatings, 11(6), 2021, pp.707–707. https://doi.org/10.3390/coatings11060707.

Müller, F., Kunz, C. and Gräf, S. Bio-Inspired Functional Surfaces Based on Laser-Induced Periodic Surface Structures. Materials, 9(6), 2016, p.476. https://doi.org/10.3390/ma9060476.

Li, X., Su, H., Li, H., Tan, X., Lin, X., Wu, Y., Xiong, X., Li, Z., Jiang, L., Xiao, T., Chen, W. and Tan, X. Photothermal superhydrophobic surface with good corrosion resistance, anti-/de-icing property and mechanical robustness fabricated via multiple-pulse laser ablation. Applied surface science, 646, 2024, pp.158944–158944. https://doi.org/10.1016/j.apsusc.2023.158944.

Bonse, J. Quo Vadis LIPSS?—Recent and Future Trends on Laser-Induced Periodic Surface Structures. Nanomaterials, 10(10), 2020, 1950. https://doi.org/10.3390/nano10101950.

Bonse, J., & Gräf, S. Ten Open Questions about Laser-Induced Periodic Surface Structures. Nanomaterials, 11(12), 2021, 3326. https://doi.org/10.3390/nano11123326.

Belousov, D.A., Bronnikov, K.A., Okotrub, K.A., Mikerin, S.L., Korolkov, V.P., Terentyev, V.S. and Dostovalov, A.V. Thermochemical Laser-Induced Periodic Surface Structures Formation by Femtosecond Laser on Hf Thin Films in Air and Vacuum. Materials, 14(21), 2021, p.6714. https://doi.org/10.3390/ma14216714.

Lübcke, A., Zsuzsanna Pápa and Matthias Schnürer Monitoring of Evolving Laser Induced Periodic Surface Structures. Applied Sciences, 9(17), 2019, pp.3636–3636. https://doi.org/10.3390/app9173636.

Goodhand, M.N., Walton, K., Blunt, L., Lung, H.W., Miller, R.J. and Marsden, R. The Limitations of ‘Ra’ to Describe Surface Roughness. 2015. https://doi.org/10.1115/gt2015-43329.

Wonneberger, R., Gräf, S., Bonse, J., Wisniewski, W., Freiberg, K., Hafermann, M., Ronning, C., Müller, F. A., & Undisz, A. Tracing the Formation of Femtosecond Laser-Induced Periodic Surface Structures (LIPSS) by Implanted Markers. ACS Applied Materials & Interfaces, 17(1), 2024, 2462–2468. https://doi.org/10.1021/acsami.4c14777.

Podulka, P. Resolving Selected Problems in Surface Topography Analysis by Application of the Autocorrelation Function. Coatings, 13(1), 2022, p.74. https://doi.org/10.3390/coatings13010074.

Podulka, P. Selection of Methods of Surface Texture Characterisation for Reduction of the Frequency-Based Errors in the Measurement and Data Analysis Processes. Sensors, 22(3), 2022, p.791. https://doi.org/10.3390/s22030791.

Peng, Z. and Kirk, T.B. Two-dimensional fast Fourier transform and power spectrum for wear particle analysis. Tribology International, 30(8), 1997, pp.583–590. https://doi.org/10.1016/s0301-679x(97)00026-1.

Abdelmalek, A., Giakoumaki, A.N., Bharadwaj, V., Sotillo, B., Phu, T.L., Bollani, M., Zeyneb Bedrane, Ramponi, R., Eaton, S.M. and Maaza, M. Morphological Study of Nanostructures Induced by Direct Femtosecond Laser Ablation on Diamond. Micromachines, 12(5), 2021, pp.583–583. https://doi.org/10.3390/mi12050583.

Magonov, S., Alexander, J. and Belikov, S. Exploring Surfaces of Materials with Atomic Force Microscopy. Nanostructure Science and Technology, 2012, pp.203–253. https://doi.org/10.1007/978-1-4614-5016-0_7.

D Nečas, P Klapetek and M Valtr. Estimation of roughness measurement bias originating from background subtraction. Measurement Science and Technology, 31(9), 2020, pp.094010–094010. https://doi.org/10.1088/1361-6501/ab8993.

Gwyddion.net. (2021). Gwyddion – Features. [online] Available at: https://gwyddion.net/features.php [Accessed 8 May 2025.

Bonse, J. and Gräf, S. Maxwell Meets Marangoni—A Review of Theories on Laser‐Induced Periodic Surface Structures. Laser & Photonics Reviews, 14(10), 2020, p.2000215. https://doi.org/10.1002/lpor.202000215.

Downloads

Published

2025-06-20

Issue

Section

Mechanical processing of materials, the theory of cutting materials, mathematical and computer simulation of machining p