No. 97 (2022): Cutting and Tools in Technological Systems

The collection publishes scientific articles, which cover current issues in the field of machining of modern materials using high-performance technologies, new methods and measuring instruments to control the quality of treated surfaces and high-performance cutting tools. Aspects of optimization and mathematical modeling at different stages of the technological process are covered.

Published: 2022-11-04

Addition technologies in mechanical engineering

INVESTIGATION ON PRODUCTION PARAMETERS OF ADDITIVELY MANUFACTURED ABS POLYMER GEARS

Mehdiyev Ziya, Felhő Csaba, Berkes Maros Maria

91-102
- PDF_08
INFLUENCE OF DETERMINATION ACCURACY OF THE BUILD STEP ON THE EFFICIENCY OF ADAPTIVE SLICING GROUP OF PRODUCTS FOR LAYERED MANUFACTURING

Garashchenko Yaroslav, Harashchenko Olena

164-172
- PDF_15

Mechanical processing of materials, the theory of cutting materials, mathematical and computer simulation of machining p

CALCULATION OF SHEAR ANGLE WHEN CUTTING WITH A TOOL OF A NEGATIVE RAKE ANGLE

Manovytskyi Oleksandr, Klymenko Sergiy, Burykin Vitalyi

59-69
- PDF_05
CAUSES OF DIFFERENT WAVES OF MACHINED SURFACES AFTER UP AND DOWN END-MILLING

Dyadya Sergei, Kozlova Olena, Karamushka Daria, Kushnir Eugene

32-38
- PDF_03
PRELIMINARY ANALYSIS OF SURFACE TOPOGRAPHY IN TANGENTIAL TURNING

Sztankovics István, Pásztor István T.

155-163
- PDF_14
FEM ANALYSIS OF THE BURNISHING PROCESS OF X5CrNi18-10 STAINLESS STEEL

Sztankovics István, Varga Gyula

137-144
- PDF_12
ANALYSIS OF THE SBI AND SVI FUNCTIONAL INDICES IN HARD MACHINING

Molnár Viktor

113-123
- PDF_10
ANALYZING THE EFFECT OF THE TOOL PASS NUMBER AND THE DIRECTION OF SLIDING BURNISHING ON SURFACE ROUGHNESS

Nagy Antal, Varga Gyula

70-82
- PDF_06
FACE MILLING OF STEEL WITH OCTAGONAL INSERT

Makkai Tamás

145-154
- PDF_13
THEORETICAL JUSTIFICATION OF RATIONAL CONDITIONS FOR PRODUCING DIAMOND WHEELS ON CERAMIC BONDS

Fedorovich Vladimir, Ostroverkh Yevgeniy, Pyzhov Ivan, Lavrinenko Valerii

124-136
- PDF_11
THE NATURE OF THE FORMATION OF SURFACE MICRO-ROUGHNESS IN VIBRATION FINISHING AND GRINDING PROCESSING

Mitsyk Andrii , Fedorovich, Vladimir

103-112
- PDF_09
THE EFFECT OF BURNISHING PROCESS ON SKEWNESS AND KURTOSIS OF THE SCALE LIMITED SURFACE

Ferencsik Viktoria, Varga Gyula

83-90
- PDF_07

The ability to use tools from new materials

SURFACE MODIFICATION OF SYNTHETIC GRINDING POWDERS DIAMOND WITH HEAT-RESISTANT OXIDES AND CHLORIDES LIQUID PHASE APPLICATION METHOD

Lavrinenko Valerii, Poltoratsky Volodymyr, Bochechka Oleksandr, Solod Volodymyr, Ostroverkh Yevgeniy, Fedorovich Vladimir

39-58
- PDF_04
STRUCTURE, COMPOSITION AND MECHANICAL PROPERTIES OF MULTI-LAYER VACUUM-ARC NITRIDE COATINGS

Klymenko Serhiy, Klymenko Sergiy, Manokhin Andriy, Stolbovoy Vyacheslav, Beresvev Vyacheslav, Šiška Fillip, Chlup Zdeněk

21-31
- PDF_02

Organization of production (production process). Production planning.

COMPARISON ANALYSIS OF MATERIAL HANDLING SOLUTIONS OF PRODUCTION WORKPLACES

Telek Péter

3-20
- PDF_01

No. 97 (2022): Cutting and Tools in Technological Systems

Addition technologies in mechanical engineering

INVESTIGATION ON PRODUCTION PARAMETERS OF ADDITIVELY MANUFACTURED ABS POLYMER GEARS

INFLUENCE OF DETERMINATION ACCURACY OF THE BUILD STEP ON THE EFFICIENCY OF ADAPTIVE SLICING GROUP OF PRODUCTS FOR LAYERED MANUFACTURING

Mechanical processing of materials, the theory of cutting materials, mathematical and computer simulation of machining p

CALCULATION OF SHEAR ANGLE WHEN CUTTING WITH A TOOL OF A NEGATIVE RAKE ANGLE

CAUSES OF DIFFERENT WAVES OF MACHINED SURFACES AFTER UP AND DOWN END-MILLING

PRELIMINARY ANALYSIS OF SURFACE TOPOGRAPHY IN TANGENTIAL TURNING

FEM ANALYSIS OF THE BURNISHING PROCESS OF X5CrNi18-10 STAINLESS STEEL

ANALYSIS OF THE SBI AND SVI FUNCTIONAL INDICES IN HARD MACHINING

ANALYZING THE EFFECT OF THE TOOL PASS NUMBER AND THE DIRECTION OF SLIDING BURNISHING ON SURFACE ROUGHNESS

FACE MILLING OF STEEL WITH OCTAGONAL INSERT

THEORETICAL JUSTIFICATION OF RATIONAL CONDITIONS FOR PRODUCING DIAMOND WHEELS ON CERAMIC BONDS

THE NATURE OF THE FORMATION OF SURFACE MICRO-ROUGHNESS IN VIBRATION FINISHING AND GRINDING PROCESSING

THE EFFECT OF BURNISHING PROCESS ON SKEWNESS AND KURTOSIS OF THE SCALE LIMITED SURFACE

The ability to use tools from new materials

SURFACE MODIFICATION OF SYNTHETIC GRINDING POWDERS DIAMOND WITH HEAT-RESISTANT OXIDES AND CHLORIDES LIQUID PHASE APPLICATION METHOD

STRUCTURE, COMPOSITION AND MECHANICAL PROPERTIES OF MULTI-LAYER VACUUM-ARC NITRIDE COATINGS

Organization of production (production process). Production planning.

COMPARISON ANALYSIS OF MATERIAL HANDLING SOLUTIONS OF PRODUCTION WORKPLACES

Information

Developed By