EVALUATION OF THE FORECASTED EFFICIENCY OF PERFORMANCE OF RATIONAL ORIENTATION OF THE PRODUCT IN THE WORKSPACE OF ADDITIVE INSTALLATIONS

Authors

DOI:

https://doi.org/10.20998/2078-7405.2021.94.16

Keywords:

technology planning, additive manufacturing, triangulated model, assessment of manufacturability, product orientation in the workspace

Abstract

Preliminary evaluation of the predicted efficiency of the optimization problem of the rational orientation of the product in the working space of layered construction of additive units is proposed to perform based on the analysis of the original triangulation 3D-model of a complex product by its spherical mapping. The condition of reflection on the sphere is that the values of angles in the spherical coordinate system for the faces normal of the triangulated model of product fall into the range of values of a certain triangular face of the sphere model. Examples of evaluation based on the analysis of spherical mapping of the original 3D model of products are considered. Industrial products with different surface complexity were selected as test 3D models. This approach allowed to perform a comparative analysis of the results depending on the design features of the products. The practical implementation was performed in the subsystem of visual assessment of geometric characteristics of triangulated 3D-models, which is part of the technological preparation system for the complex product manufacture by additive methods. This system was developed in NTU "KhPI" Department of Integrated Technologies of Mechanical Engineering named after M.F. Semko.

Author Biographies

Garashchenko Yaroslav, National Technical University "Kharkiv Polytechnic Institute", Kharkiv

Associate Professor, Department of Integrated Technologies of Mechanical Engineering named after M.F. Semko, National Technical University «Kharkiv Polytechnic Institute»,  Kharkiv, Ukraine

Zubkova Nina, National Technical University "Kharkiv Polytechnic Institute", Kharkiv

Associate Professor, Department of Integrated Technologies of Mechanical Engineering named after M.F. Semko, National Technical University «Kharkiv Polytechnic Institute», Kharkiv, Ukraine

References

Diegel O., Nordin A., Motte D. A Practical Guide to Design for Additive Manufacturing. Springer Series in Advanced Manufacturing, 2019, doi: 10.1007/978-981-13-8281-9

Gibson I., Rosen D., Stucker B., Khorasani M. Additive manufacturing technologies. 3rd Edition. Cham (Switzerland): Springer Nature Switzerland AG, 2021, 675 pp., doi: 10.1007/978-3-030-56127-7

Eranpurwala A., Ghiasian S.E., Lewis K. Predicting Build Orientation of Additively Manufactured Parts With Mechanical Machining Features Using Deep Learning. Proceedings of the ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Volume 11A: 46th Design Automation Conference (DAC). Virtual, Online. August 17–19, 2020, V11AT11A023. ASME., doi: 10.1115/DETC2020-22043

Hong S., Byun K., Lee H. Determination of optimal build direction in rapid prototyping with variable slicing. Int. J. Adv. Manuf. Technol. 2006, No. 28. P. 307-313, doi: 10.1007/s00170-004-2355-5

Canellidis V., Giannatsis J., Dedoussis V. Genetic-algorithm-based multi-objective optimization of the build orientation in stereolithography. Int J Adv Manuf Technol, 2009, 45: 714–730. doi: 10.1007/s00170-009-2006-y

Singhal S.K., Pandey A.P., Pandey P.M., Nagpal A.K. Optimum part deposition orientation in stereolithography. Computer-Aided Design & Applications. 2005, Vol. 2, Nos. 1-4, pp. 319-328

Bablani M., Bagchi A. Quantification of errors in rapid prototyping processes, and determination of preferred orientation of parts, Transactions of the North American Manufacturing Research Institution of the SME, Vol. XXIII, SME, Houghton, Ml, May 1995, pp. 319-324

Thompson D.C., Crawford R.H. Optimizing part quality with orientation, in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1995, University of Texas, Austin, August 1995

Vitjazev Ju.B. Rasshirenie tehnologicheskih vozmozhnostej uskorennogo formoobrazovanija sposobom stereolitografii: Dis... kand. tehn. nauk: 05.02.08, Kharkiv, 2004, 228 p.

Pat. 54398U UKRAYINA, MPK B29C 35/08, B29C 41/02, G06F 17/50, G06F 19/00. Sposib posharovoyi pobudovy vyrobiv na bazi vykhidnoyi trianhulyatsiynoyi 3D modeli / Abdurayimov L.N., Chernyshov S.I., Dobroskok V.L., Vityazyev Yu.B.; zayavnyk i patentovlasnyk Nats. tekhn. un-t "Kharkivs'kyy politekhn. in-t". – № u201004548; Zayavl. 19.04.2010; Opubl. 10.11.2010, Byul. № 21

Moroni G., Syam W. P., Petrò S., Functionality-based Part Orientation for Additive Manufacturing, Procedia CIRP, 2015, 36, pp. 217-222

Zhang Y., Bernard A., Gupta R. K., Harik R. Feature Based Building Orientation Optimization for Additive Manufacturing, Rapid Prototyping Journal, 2016, 22(2), pp. 358-376

Rocha A. M. A., Pereira A. I., Vaz, A. I. F. Build Orientation Optimization Problem in Additive Manufacturing, Proc. International Conference on Computational Science and Its Applications, Springer, 2018, pp. 669-682

Abdurajimov L.N. Povyshenie jeffektivnosti integrirovannyh tehnologij poslojnogo vyrashhivanija izdelij putem morfologicheskogo analiza ih 3D obraza na jetape podgotovki k materializacii: Dis. kand... tehn. nauk: 05.02.08. Kharkiv: NTU "Khark. pol. in-t.", 2012, 264 p.

Ranjan Rajit, Samant Rutuja, Anand Sam. Design for manufacturability in additive manufacturing using a graph based approach. In: ASME 2015 International Manufacturing Science and Engineering Conference. American Society of Mech. Engineers, 2015, pp. 1-10. doi: 10.1115/MSEC2015-9448

Shwe P. Soe. Quantitative analysis on SLS part curling using EOS P700 machine, Journal of Materials Processing Technology, 212 (2012), pp. 2433– 2442. doi: 10.1016/j.jmatprotec.2012.06.012

Daekeon A., Hochan K., Seokhee L. Fabrication direction optimization to minimize post-machining in layered manufacturing, International Journal of Machine Tools and Manufacture, Volume 47, Issues 3–4, March 2007, pp. 593-606. doi: 10.1016/j.ijmachtools.2006.05.004

Kumke M., Watschke H., Vietor T. A new methodological framework for design for additive manufacturing. Virtual And Physical Prototyping Vol. 11, Iss. 1, 2016, pp. 3-19. doi: 10.1080/ 17452759.2016.1139377

Garashchenko Ya. Vizualna otsinka mozhlyvosti ratsionalnoi oriientatsii vyrobu pry posharovii pobudovi na ustanovkakh adytyvnykh tekhnolohii. Visnyk ZhDTU. Seriia: Tekhnichni nauky. Zhytomyr: ZhDTU, T. 1, № 2(80), 2017, pp. 3-10. doi: 10.26642/tn-2017-2(80)-3-10

Garashchenko Ya. Otsenka yskhodnoi 3D-modely na prysposoblennost k opredelenyiu ratsyonalnoi oryentatsyy yzdelyia pry posloinom postroenyy. Rezanye y ynstrument v tekhnolohycheskykh systemakh, 2017, Vip. 87, pp. 28-40

Podgornyj А.Z., Mylashko O.G., Kirsho S.M., SHilofost N.M. Statistika: Uchebnoe posobie dlya inostrannykh studentov, Odessa: Аtlant, 2012, 195 p.

Downloads

Published

2021-06-16

Issue

No. 94 (2021): Cutting and Tools in Technological Systems

Section

Mechanical processing of materials, the theory of cutting materials, mathematical and computer simulation of machining p

License

Copyright Notice

Authors who publish with this Collection agree to the following terms:

1. Authors retain copyright and grant the Collection right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this Collection.

2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the Collection's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this Collection.

3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.