THE EFFECT OF THE POINT SAMPLING TO THE RESULT OF COORDINATE MEASURING OF FREE-FORM SURFACE

Authors

DOI:

https://doi.org/10.20998/2078-7405.2022.96.10

Abstract

The coordinate measuring technique appropriates to measure dimensional and geometric properties of a machine part. The result of the measuring is effected by several parameters, like the measuring method, the point sampling technique, and the mathematical processing of the measured coordinates. The current article investigates the effect of the point sampling methods in case of a free-form surface. Two methods are compared: the uniform matrix method, and the Halton-Zaremba quasi-random method. The number of measured points is investigated also. The free-form test surface was produced by ball-end milling, and the radius, the cylindricity and the surface profile error were assessed.

Author Biographies

Varga Bálint, Óbuda University, Budapest, Hungary

Master's Student, Óbuda University, Budapest, Bánki Donát Faculty of Mechanical and Safety Engineering Institute of Material and Manufacturing Science Department of Manufacturing Engineering, Hungary

Balázs Mikó , Óbuda University, Budapest, Hungary

Candidate of Technical Sciences, Associate Professor, Óbuda University, Budapest, Bánki Donát Faculty of Mechanical and Safety Engineering Institute of Material and Manufacturing Science Department of Manufacturing Engineering, Hungary

References

Li Y; Gu P. (2004) Free-form surface inspection techniques state of the art review. Computer-aided design 36:1395-1417 doi: 10.1016/j.cad.2004.02.009.

Kawalec A; Magdziak M. (2011) An influence of the number of measurement points on the accuracy of measurements of free-form surfaces on CNC machine tool. Advances in Manufacturing Science and Technology 35(2):17-27.

Zhao D; Wang W.; Zhou J.; Jiang R.; Cui K.; Jin Q. (2018) Measurement point sampling method for inspection of parts with free-form surfaces. Advances in Mechanical Engineering 10(11):1-12 doi: 10.1177/1687814018809577.

Zahmati J.; Amirabadi H.; Mehrad V. (2018) A hybrid measurement sampling method for accurate inspection of geometric errors on freeform surfaces. Measurement 122:155-167 doi: 10.1016/j.measurement.2018.03.013.

Rajamohan G.; Shunmugam M.S.; Samuel G.L. (2011) Practical measurement strategies for verification of freeform surfaces using coordinate measuring machines. Metrology and Measurement Systems 18(2):209-222 doi: 10.2478/v10178-011-0004-y.

Moroni G, Petro S. (2011) Coordinate measuring machine measurement planning. Colosimo B, Senin N (eds) Geometric Tolerances. Springer, London pp.111-158 doi: 10.1007/978-1-84996-311-4_4.

Mikó B. (2021) Assessment of flatness error by regression analysis. Measurement 171:108720 doi: 10.1016/j.measurement.2020.108720.

Downloads

Published

2022-03-02

Issue

No. 96 (2022): Cutting and Tools in Technological Systems

Section

Mechanical processing of materials, the theory of cutting materials, mathematical and computer simulation of machining p

License

Copyright Notice

Authors who publish with this Collection agree to the following terms:

1. Authors retain copyright and grant the Collection right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this Collection.

2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the Collection's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this Collection.

3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.